High Power + RF

High Power and RF Electronics

2d-materials

Applications in High power & RF electronics – Nitrides

Aluminum gallium nitride (AlGaN)-based wide and ultra-wide bandgap semiconductors are vital for high-power and radio frequency (RF) electronics because their bandgap—tunable from 3.4 eV (GaN) up to 6.2 eV (AlN)—supports high breakdown fields and strong polarization effects. In AlGaN/GaN high electron mobility transistors (HEMTs) and high-aluminum-content AlGaN devices, these properties enable high voltage operation, low conduction losses, high power density, and fast switching or high-frequency response. This makes them well suited for demanding RF transmitters, radar and communications systems, and compact, high-efficiency power conversion.

Growing AlGaN heterostructures for production requires precise composition control, clean interfaces, and scalable throughput, which the OCTOPLUS 800 from Dr. Eberl MBE-Komponenten is built to deliver. Its 800 mm inner-diameter deposition chamber supports ultra-high vacuum. Dual large cryopump pumping with 2x3000 l/s combined capacity allows growth at low chamber pressure and large mean free path while growing at high nitrogen plasma flow rates. Together with in-situ monitoring tools such as RHEED, QCM, pyrometry, and optical curvature scanning, these capabilities help maintain uniform alloy ratios and sharp layer transitions across demanding nitride growth runs.

The SUSI-100 effusion cell offers precise repeatable growth of SiN passivation layers while the MBE type process avoids reactor contamination issues often encountered when growing SiN in CVD based epitaxy.

For device manufacturing rather than single-piece laboratory trials, the OCTOPLUS MBE systems combine multi-wafer and large-wafer capacity with automated handling. It accommodates substrates up to 200 mm (8-inch) as well as multi-wafer arrangements such as 4x4-inch or 7x3-inch in a face-down geometry paired with automated transfer capabilities. Backed by application engineering and support from MBE-Komponenten, this architecture helps semiconductor teams move AlGaN high-power and RF heterostructures efficiently from process development into high-throughput production.

Ferroelectric Nitrides

Ferroelectric wurtzite nitrides—such as scandium- and boron-alloyed aluminum nitride (ScAlN, AlBN, and quaternary ScAlBN)—are transforming next-generation electronics by bringing switchable polarization directly into ultra-wide-bandgap semiconductor platforms while poviding additional degree of freedom for lattice matching to diverse substrates including GaN, AlN, 4H-SiC, sapphire. Incorporating scandium and boron lowers the switching energy barrier of AlN so that polarization reversal occurs well below dielectric breakdown, delivering high remanent polarization, high thermal stability, and epitaxial compatibility with GaN and Si-based technologies.

Growing single-crystalline ScAlBN layers by MBE poses a distinct hardware challenge: elemental boron has an extremely low vapor pressure and requires very high evaporation temperatures where conventional effusion cells suffer from insufficient flux or crucible contamination. The Vertical Electron Beam Evaporator EBVV from MBE-Komponenten directly solves this bottleneck. With up to 3 kW of electron-beam power, 270° electromagnetic x-y dynamic beam deflection, the EBVV provides clean, stable, and controllable boron fluxes without excessive thermal load or metallic impurities. Furthermore, its compact flange design allows it to mount directly onto standard effusion cell ports making it straightforward to integrate into systems like the OCTOPLUS 800 for multi-element ScAlN epitaxy. For transition metals such as scandium large capacity high temperature effusion cells are availiable to compliment the growth of complex ferrorelectric materials.

UHV Deposition Systems

Components for two-dimensional material deposition

Technical specifications are subject to change without notice.